| |
 |
|
GIC Plywood is manufactured in
a fully automated plant with hot pressing facility in cross band
and face veneers using specified resins.
Customer convenience, purpose/ application and costs are the deciding
yardsticks for choice. It is widely used in making furnitures ,
wardrobes , partitions , ceilings , Panel Doors
, theatres/auditoriums etc. It is made in general conformity to
BIS : 303.
|
 |
Boiling Water Proof
|
Plywood manufacturing is categorised as under:
- Commercial face veneered.
- Decorative/Teak face veneered (one side/both
side)
- Thickness 3mm to 25mm
- Water resistant
- Boiling Water resistant
- Standard sizes: 8' X 4' ,
8' X 3' , 7' X 4' , 6' X 3'
|
Water Resistant
|
Termite Resistant |
IS:303 |
GIC
is a licensee of Bureau of Indian Standards and offers Plywood
(for general purpose) with ISI mark under Code No: IS :303.
|
|
BWP Plywood is the ideal choice for interior and exterior speciality
applications including kitchens, bathrooms, balconies and other
moisture and heat laden atmospheres. BWP Plywood also goes through
a chemical bath which gives it an in built armoured resistance
to fungi and wood |
- FURNITURE MAKING
- LOOSE FURNITURES
- PARTITION
- FIXED FURNITURES
- FURNISHING
- SELF DOOR-MAKING
|
|
Plywood is made using suitable dryer dried
core veneers with glue lines and one face veneer on each side.
It is hot pressed for perfect glue bonding. Great deal of
attention is given to the selection of veneers and their composition
to infuse a high degree of strength and bring uniform thickness,
smooth finish and dimension stability.
In case of BWP range , 100% pure Phenol Formaldehyde resin
is used which imparts 100% perfect bonding and also full resistance
against cold or boiling water , tropical damp climates , abrasive
sea weather conditions and extreme cyclic changes in weather.
|
|
GIC owns the following Brand Trade Marks for its Plywood Products
|
 |
 |
 |
 |
|
|
